The Xbox One console is definitely an incredible package alone. However, with games like Cod 5, Modern Warfare, and Modern Warfare 2, increasing numbers of people find top reasons to modify the said game console, or its accessories. One particular modification is really a reaction to produce a rapid fire modded Xbox controller. Listed below are the steps concerning how to modify your original controller to a rapid fire controller.
Step 1. Unscrewing the controller
Before starting taking your controller apart, please take a critical look in the controller first and then try to remember which parts go where since you will eventually have to put everything returning. Begin with unscrewing each of the visible screws behind. After this, prior to deciding to tug on the case, remove the batteries to show the hidden screws. Remove these at the same time.
Step 2. Preparing the truth
Using the controller facing down, slowly and punctiliously separate top half the casing from your circuit board. An opening in the case will eventually need to be made. Keep this in mind before putting things back.
Step three. Placing The Rapid Fire Button
While other methods of modifying the controller don’t involve installation of a whole new button, this specific guide does. Not only does this make it easier to adjust the rate of rapid fire, it minimizes tampering along with other parts of the circuit board, thereby minimizing the potential risk of damaging your modded Xbox One console controller.
Remember, kits for that rapid fire controller can be bought easily. It’s the button because of this kit which will be placed over the hole from the casing, so install it gently before the circuit board is returned. You might have to snip out a number of flaps to generate method for the wires with the kit. This can be accomplished with either a cutter or possibly a set of scissors.
Step 4. Soldering
Let’s assume that you know how to properly employ a soldering iron, attach the red wire on the leftmost pin of your 4-pin horizontal series, even though the blue wire solders towards the rightmost pin the exact same series. The black (or green occasionally) wire attaches on the core three vertical series to the right from the switch.
Soldering is regarded as the crucial the answer to making the modded Xbox One console controller. The reason being mistakes made with this stage can permanently damage your controller.
Step . 5. Putting everything back
Carefully considering the wires, attempt to close the circuit board along with the casing. This is usually a little tricky for the reason that new wires is certain to get in the way of things. Have the option of those wires to occupy the empty spaces as opposed to herniated. You could possibly retain the modded Xbox One system controller facedown so your buttons don’t fall and maneuvering the wires really are a little easier. Position the casings together along with return the screws yet.
You now need to find out if the rapid fire buttons work. If they don’t, you may want to restart your console along with the now modded Xbox controller. This certainly will solve the situation. Whether it doesn’t then you can will need to go over the steps again to verify.
Check out about ps4 rapid fire controllers you can check our new website.